Pickering Series 110
V-SIL Reed Relays
For stacking on 0.15 x 0.4 inches pitch giving SUPERB PACKING DENSITY
SoftCenter ® construction
Highest quality instrumentation grade switches
Plastic package with internal mu-metal magnetic screen
They take up the minimum of board area, conserving
board space
Insulation resistance greater than 10E12 Ohms (1TOhms)
5 and 12 Volt coils are standard, with or without internal diode
5 Volt coils of 500 ohms may be driven directly from TTL logice

100% tested for dynamic contact resistance

The Pickering Series 110 V-SIL (vertical single-in-line) is a range of magnetically screened single-in-line reed relays that stack on 0.15 inches by 0.4 inches pitch.The switches in this range are mounted vertically within the package, this allows the use of the same switch types as would normally be found in relays requiring a very much larger board area.

In this way, a 10 Watt switch power rating is achieved. Two types of Form A (energize to make) switches are available, a general purpose version and type suitable for low level or “cold” switching applications.



  Download PDF Data Sheet for Series 110
  Download 3D Models for Series 110




Pickering Reed Relay V-SIL 10 Watts 110


Reed Relays 110 V-SIL Dimensions